Reproduction Parts for 1916-1964 Chevrolet Passenger Cars & 1918-1987 Chevrolet & GMC Trucks

Visit the new site at vcca.org

Register Log In

VCCA Home Forums TECHNICAL - 1945 AND EARLIER 1912-1928 Plate or Paint?

Print Thread

Rate Thread

Plate or Paint? #51322 02/13/02 04:15 PM
Joined: Dec 2001 Posts: 217 San Jose, CA RustyFender OP Backyard Mechanic
OP RustyFender Backyard Mechanic Joined: Dec 2001 Posts: 217 San Jose, CA	Hi All, Just curious if the hub bolt heads on the 28 Chevy wooden wheel are cad plated or painted? Also, what is correct for the rims? I have seen them painted black as well as plated. Thanks! -R

Filling Station - Chevrolet & GMC Reproduction Parts

Re: Plate or Paint? #51323 02/13/02 04:51 PM
Joined: Dec 2001 Posts: 27 Norway Arvid Grease Monkey
Arvid Grease Monkey Joined: Dec 2001 Posts: 27 Norway	Hello The -29 finish requirements says: Demountable rims : Black enamel Dem. rim bolt & nut : black oxide dem. rim clamp : Black oxide. My be the -28 have the same requirements? Regards Arvid http://privat.bluezone.no/ar-b/eng/index.html

Re: Plate or Paint? #51324 02/15/02 02:39 PM
Joined: Jan 2002 Posts: 2 Kingwood, Texas` Augusta Grease Monkey
Augusta Grease Monkey Joined: Jan 2002 Posts: 2 Kingwood, Texas`	Rusty Fender: I own 5 28's (four trucks and 1 coupe) and all my hubs are painted. The covers that screw on the hubs for the trucks are also painted but on the coupe it is polished metal. B. Ward BHW

Re: Plate or Paint? #51325 02/16/02 10:57 PM
Joined: Jan 2002 Posts: 23 Jones Creek, TX 31derful Grease Monkey
31derful Grease Monkey Joined: Jan 2002 Posts: 23 Jones Creek, TX	Finally had a chance to search out my wheel book. The '28-30 Chevys had black rims, bolts, etc. The hub bolts are also black.

Re: Plate or Paint? #51326 02/17/02 12:34 AM
Joined: Dec 2001 Posts: 217 San Jose, CA RustyFender OP Backyard Mechanic
OP RustyFender Backyard Mechanic Joined: Dec 2001 Posts: 217 San Jose, CA	Thanks to All! -R

Hop To

Link Copied to Clipboard

Notice: Any comments posted herein do not necessarily reflect the official position of the VCCA.

Powered by UBB.threads™ PHP Forum Software 7.7.5