|
|
|
|
Joined: Jul 2020
Posts: 40
Shade Tree Mechanic
|
OP
Shade Tree Mechanic
Joined: Jul 2020
Posts: 40 |
I've got two T-3 headlights that have "Seal beam" in the bottom section. They both are good. I also have one installed in the car that has "Guide" in the bottom section. Which ones are correct for a 1957 Chevy? All (3) are good. Should I put both of the ones that have "Seal beam" on the car? What does the Judges say?
|
|
|
|
|
Joined: Jan 2002
Posts: 30,701 Likes: 141
ChatMaster - 25,000
|
|
ChatMaster - 25,000
Joined: Jan 2002
Posts: 30,701 Likes: 141 |
i will look through my stuff tommorw and see if I can find the information
Gene Schneider
|
|
|
|
|
Joined: Dec 2001
Posts: 2,142 Likes: 3
ChatMaster - 2,000
|
|
ChatMaster - 2,000
Joined: Dec 2001
Posts: 2,142 Likes: 3 |
I do know that Corvettes and Passenger Cars use the same T-3's and if I remember correctly the words "sealed Beam" in 57 are smaller then they were in 56 and are about 2 1/2" in overall length, and are smaller font. As far judges noticing it, that all depends on what organization is doing the judging
Last edited by John 348/340HP; 08/23/22 01:55 AM.
John
1954 Belair Sport Coupe
1960 2 door Impala Hardtop 348/340HP 4spd
1962 2 door Impala Hardtop 409/409 4spd
1962 2 Door Biscayne Sedan 327/250 Auto
1977 Monza Mirage 305 4 Speed
1988 Celebrity Wagon
2018 GMC Sierra 2500 HD Diesel
|
|
|
|
|
Joined: Nov 2003
Posts: 2,576 Likes: 2
ChatMaster - 2,000
|
|
ChatMaster - 2,000
Joined: Nov 2003
Posts: 2,576 Likes: 2 |
per NCRS judging manual: "headlamp bulbs must be matching Guide T-3 design , with pebble grain (not vertical lines) within the triangle. SEALED BEAM 3/8" and 1/4" high lettering were both used throughout the 56 and 57 model years." However, i agree with john the 56's utilized the small lettering and the 57's used the large lettering. mike mccagh
|
|
|
|
|
|
|
