|
|
Joined: Mar 2008
Posts: 911
ChatMaster - 750
|
OP
ChatMaster - 750
Joined: Mar 2008
Posts: 911 |
Iam changing the light switch face plate on my 29. How does that switch knob come apart? It sure don't seem to come right out Thanks
|
|
|
|
|
Joined: Feb 2006
Posts: 2,262 Likes: 6
ChatMaster - 2,000
|
|
ChatMaster - 2,000
Joined: Feb 2006
Posts: 2,262 Likes: 6 |
The back side of the knob is drilled and threaded, and a round-head machine screw holds the knob in place. To disassemble, you have to open the back of the switch by prying open the tabs around the edge, then lift out the plate and you can then see the slotted screw in the back.
Best bet is to disconnect the battery, disconnect the leads, and remove the entire switch so you can work on it at the workbench.
Hope that helps.
All the Best, Chip
"It's wise to choose a SIX"
|
|
|
|
|
Joined: Nov 2001
Posts: 29,863
Tech Advisor ChatMaster - 25,000
|
|
Tech Advisor ChatMaster - 25,000
Joined: Nov 2001
Posts: 29,863 |
The Mangy Old Mutt
"If It's Not Junk.....It's Not Treasure!"
|
|
|
|
|
Joined: Mar 2008
Posts: 911
ChatMaster - 750
|
|
OP
ChatMaster - 750
Joined: Mar 2008
Posts: 911 |
That's a lot deeper than I wanted to go, but whats new. There is no face glass that covers the plastic that has the printing,,correct?
|
|
|
|
|
Joined: Nov 2001
Posts: 29,863
Tech Advisor ChatMaster - 25,000
|
|
Tech Advisor ChatMaster - 25,000
Joined: Nov 2001
Posts: 29,863 |
The Mangy Old Mutt
"If It's Not Junk.....It's Not Treasure!"
|
|
|
|
|
Joined: Mar 2008
Posts: 911
ChatMaster - 750
|
|
OP
ChatMaster - 750
Joined: Mar 2008
Posts: 911 |
|
|
|
|
|
Joined: Nov 2001
Posts: 29,863
Tech Advisor ChatMaster - 25,000
|
|
Tech Advisor ChatMaster - 25,000
Joined: Nov 2001
Posts: 29,863 |
The Mangy Old Mutt
"If It's Not Junk.....It's Not Treasure!"
|
|
|
|
|
Joined: Feb 2006
Posts: 2,262 Likes: 6
ChatMaster - 2,000
|
|
ChatMaster - 2,000
Joined: Feb 2006
Posts: 2,262 Likes: 6 |
Happy to help.
All the Best, Chip
"It's wise to choose a SIX"
|
|
|
|
|
Joined: Mar 2008
Posts: 911
ChatMaster - 750
|
|
OP
ChatMaster - 750
Joined: Mar 2008
Posts: 911 |
It worked got it apart, new back plate, polished the knob, and back in the dash. AND the lights still work. Thanks again. Happy new year. Roger
|
|
|
|
|
Joined: Feb 2006
Posts: 2,262 Likes: 6
ChatMaster - 2,000
|
|
ChatMaster - 2,000
Joined: Feb 2006
Posts: 2,262 Likes: 6 |
"It's wise to choose a SIX"
|
|
|
|
|
