|
|
|
|
Joined: May 2016
Posts: 17
Grease Monkey
|
OP
Grease Monkey
Joined: May 2016
Posts: 17 |
I have a 1928 Chevrolet fire truck with wood spokes. The spokes have been painted. I have striped the paint off, sanded and sanded, but I am not happy with the results. Is there a place in Orange County, CA that can help me get them cleaner? If not any suggestions. What should I coat the spokes with?
|
|
|
|
|
Joined: May 2016
Posts: 35
Shade Tree Mechanic
|
|
Shade Tree Mechanic
Joined: May 2016
Posts: 35 |
Oxalic acid crystals are available at hardware stores. Mixed with water, it is used as a wood bleaching agent.
But I don't know if it would work by just brushing it on all day long, or if it might do something to the painted steel parts.
My own preference is color painted spokes, rather than stain/varnish.
|
|
|
|
|
Joined: Mar 2002
Posts: 1,739 Likes: 2
ChatMaster - 1,500
|
|
ChatMaster - 1,500
Joined: Mar 2002
Posts: 1,739 Likes: 2 |
They are supposed to be painted.
|
|
|
|
|
Joined: Apr 2006
Posts: 3,511 Likes: 48
ChatMaster - 3,000
|
|
ChatMaster - 3,000
Joined: Apr 2006
Posts: 3,511 Likes: 48 |
I suspect when the spokes were originally painted, the paint soaked into the wood somewhat, making it difficult to go back to clear spokes. If this is the case, a lot of sanding might not help.
Just speculating. Dean
Dean 'Rustoholic' Meltz old and ugly is beautiful!
|
|
|
|
|
Joined: Nov 2008
Posts: 322
Backyard Mechanic
|
|
Backyard Mechanic
Joined: Nov 2008
Posts: 322 |
When I cleaned a set of wood spoked wheels a number of years ago I found that a sharp card scraper was the most effective tool to use to remove the outside layer so as to get down to nice clean wood.
|
|
|
|
|
Joined: Jun 2005
Posts: 408
Backyard Mechanic
|
|
Backyard Mechanic
Joined: Jun 2005
Posts: 408 |
The spokes were made of fairly hard wood that really didn't absorb anything much. The best way to strip is to apply paint stripper and scrape down to a point where residual paint or varnish lies in the grain. Then apply stripper and scrub with warm water with liquid sugar soap in it. Allow to dry and sand lightly.
|
|
|
|
|
Joined: May 2016
Posts: 17
Grease Monkey
|
|
OP
Grease Monkey
Joined: May 2016
Posts: 17 |
Thanks to everyone. I stopped sanding, I was left with a nice wood grain, applied marine varnish. Wow do they look good. Thanks for everyone's advice.
|
|
|
|
|
|
|
