VCCA Home Forums TECHNICAL - 1945 AND EARLIER 1929-1932 1931 Clutch

A schematic, or diagram, or blowup of the entire clutch mechanism for the 1931 would be quite useful. I have a reproduction 1929-32 repair manual but the information is not comprehensive enough to suit a thorough understanding of everything including parts, adjustment etc. Can anyone recommend a publication or provide a detailed schematic that includes pedal,return spring, shaft, fork, throwout bearing, pressure plate and disk? It will be quite useful in getting my clutch properly adjusted.

Best Regards,
Tom

There is a cross section view and a semi exploded view in the 1932 six cylinder master parts list. There is also a view of the actuating plate on the pedal in the workshop manual and engineering features book.
Let me know if you need scans.

Thank-you for your courteous reply. Yes, scans, if you could provide them , would be very helpful.

Best Regards,
Tom

Tom , i have sent the scans to your email address.
Cheers Jack

This link is to pictures of the clutch return spring pin which fits in the hole in the end of the clutch fork.
the manual shows a cotter (split) pin , but this is also included in the parts manual with no views anywhere.

https://vccachat.org/ubbthreads.php/galleries/236264/1931_1932_clutch_fork_return_s#comments