Reproduction Parts for 1916-1964 Chevrolet Passenger Cars & 1918-1987 Chevrolet & GMC Trucks

Visit the new site at vcca.org

Register Log In

VCCA Home Forums TECHNICAL - 1945 AND EARLIER 1933-1936 fender fabrication

Print Thread

Rate Thread

fender fabrication #176681 06/27/10 11:49 AM
Joined: Nov 2009 Posts: 52 NW Washington State OldBagpipe OP Shade Tree Mechanic
OP OldBagpipe Shade Tree Mechanic Joined: Nov 2009 Posts: 52 NW Washington State	Is anyone aware of person/companies which will fabricate vintage fenders? I have a 1936 1 1/2 ton panel truck with the correct left rear fender but not the right rear fender. I am told the 1/2 ton fenders will not work. Any advise or comments are appreciated.

Filling Station - Chevrolet & GMC Reproduction Parts

Re: fender fabrication OldBagpipe #176687 06/27/10 03:12 PM
Joined: Dec 2001 Posts: 1,919 Vancouver, Washington 32confederate ChatMaster - 1,500
32confederate ChatMaster - 1,500 Joined: Dec 2001 Posts: 1,919 Vancouver, Washington	Hey Old Bag Pipe, Where are you located in Washington? There is a place in Portland which might be able to help you. Bruce 32 Confederate Bruce S. DeFord VCCA Judging Committee Chair The Great American Value for 1932 http://www.vccacolumbiariverregion.org/

Re: fender fabrication 32confederate #176707 06/28/10 12:06 AM
Joined: Nov 2009 Posts: 52 NW Washington State OldBagpipe OP Shade Tree Mechanic
OP OldBagpipe Shade Tree Mechanic Joined: Nov 2009 Posts: 52 NW Washington State	I am as far north as you can go. But hey, Portland is only a five hour drive and one of my wife's favorite places. Oh, she is already packing... Any names or numbers you can provide are appreciated...

Re: fender fabrication OldBagpipe #176714 06/28/10 02:57 AM
Joined: Jan 2009 Posts: 19 Oregon wsbtown Grease Monkey
wsbtown Grease Monkey Joined: Jan 2009 Posts: 19 Oregon	Couple years ago at the Portland Swap meet, there was a guy at a booth that sounded like he could do that sort of thing. I never called him...don't have any personal experience with work he may or may not have done. See if this name and number rings any bells: Duane Luckow/Metal Fab 503 761 9411 Portland, Ore

Re: fender fabrication wsbtown #176729 06/28/10 09:32 AM
Joined: Nov 2009 Posts: 52 NW Washington State OldBagpipe OP Shade Tree Mechanic
OP OldBagpipe Shade Tree Mechanic Joined: Nov 2009 Posts: 52 NW Washington State	Very good, thank you. I will hold onto this. Your effort and contribution is much appreciated.

Re: fender fabrication OldBagpipe #186229 10/16/10 11:51 AM
Joined: Nov 2009 Posts: 52 NW Washington State OldBagpipe OP Shade Tree Mechanic
OP OldBagpipe Shade Tree Mechanic Joined: Nov 2009 Posts: 52 NW Washington State	Thank you for your help, I have located two rear fenders from a '34 1.5 ton (long wheel base) panel truck.

Hop To

Link Copied to Clipboard

Notice: Any comments posted herein do not necessarily reflect the official position of the VCCA.

Powered by UBB.threads™ PHP Forum Software 7.7.5