Thanks for the reply, I have had alot more responses than I figured this quickly, I never until now figured out how much it would cost and now that I have it may be too much for anyone to bother. Kinkos charges me 19 cents per copy because it is doublesided and that is me doing it myslef so 19 times 168 pages equals 31.92, I cant change that, as mentioned I can put it on 78 pd paper ( which is a very light cardboard ) for an addit 6 dollars, that is the amount of a package of that paper and that does not even have enough paper in that package. ( It only has 125 and I need 168 butI have some left over from my own copies ) That paper will not tear easily. And then I ask for an addit 20 for my time to run these off and punch the holes for the binder and my gas again to run this to a shipper so it is definitlely more than even the 29-32 parts book but this book has alot of different pictures than that book and the part # in many cases are more accurate so like I said you wont be running here every time you have a question verifying a part. You have to believe that I had no less than 20 hours scanning each page and then making each page fit the paper so that it all looked like the real deal, I had to be so carefull with book because it is falling apart because of its age and at the time I was still only borrowing the book, it was not until I sent the man that let me borrow the book a copy of his book that he told me I could keep the original. So anyway I am trying to make everyone see where my time has been spent and help everyone to understand why it costs what it does. If anyone is still interested than reply to my e-mail address please like some of you have already done, thanks.
