Is there a source for parts if I am missing some? Thanks ahead for any replies!!!!
Jerry, Maybe you might need to post pictures of what you have?
Most of your socket wireing will be straight forward. Do you have a diagram of the wireing?
Exactly what are you wanting to know? how to wire the socket to the harness? or what?
You will need a diagram for the headlights, everything else should have one single element bulb except for the tail and stop lamp. The socket must connect to ground for a return to complete the circuit.
Here is the place.
Rhode Island Wiring Service Where I got the pics:
Wireingproducts.com Here are some pics:
Sometimes I use these.
I often will use this one for a double contact bulb and wire the two wires together to get one double filiment bulb to be twice as bright as a single filement bulb, like for a single brake light or I like this arrangment for back up lights. I have had a socket that was a tight fit in the holder and used a double filiment bulb with the contacts soldered together and had to modify the J slot in a single contact socket. I did this for a 6 volt test light in a panel and used the filiment voltage supply for the panel tubes (6.3VDC) 12 VDC for newer model tubes