have three three window coupes hope to make two out of them. have two driver doors and no pass. appreciate any help. will gladly buy any cond door can make one if i had top pieces to go around glass (curves at top of door. thanks

The doors that would work for you are 1933-1935 Standard & 1933 Master. 1934 Master will also work but more work will be needed.
You indicate you have 1933. Are any of them Standard like 33607 or 33628?
Joe

I think both the drivers doors i have are standard. They both fit my mercury body.

I was wondering if any of the cars are Standards with the job numbers as I posted.
There is no such car in the Chevrolet line for 1933. Some people refer to them as Mercury but no paper work has ever left Chevrolet indicating such. I have 2 of the "1933 Standard Six" coupes....Joe

More information
The Chevrolet "Eagle" came out first later replaced by the "Master". At about the same time, March 1933, Chevrolet introduced the "New Chevrolet Standard Six". It was offered in only 3 body styles, The Coupe, Sports Coupe & Coach.

One of my bodys has cowel tag says 33-607. Other two do not have cowel tags. I am trying to learn these cars i also have what i think is a 34 master 5 window coupe. I have both doors for this car. No deck lids for any of them but i can fab those. One of the three window bodies was a roundy round car. Quarters cut way up no tubs back window opened up. Pretty rough. Other three window no tag may be master cause bolts for fenders on top of wheel well. Just quoting things i read on hamb site. Like the mercury stuff i said i read on the hamb?? Anyway think roundy car may be a donor but not sure i should do that cause hear people like those old race cars with history and the guy i got it from knows a little of it so,,, appreciate hearing and talking about these year chevys always wanted one now got herd of them. Ha ha

1933 to 1935 standards have 6 rear fender holes that are horizontal. 1933 master has 7 the same way. 1934 master has rear fender bolts vertical. Did you end up with Hunter's stuff? The 33-607 is a 1933 Standard Coupe but you probably knew that.
...Joe

Dont know hunter. My cars come from missouri and okla. count my bolt holes when i get home.

Could you give me all the info from the 33607 tag please.

Hunter had some cars like you have but lost them to storage

Joe

Bottom of tag missing. Only info is 33-607. This car was in salvage yard for long time in joplin missouri. U can call gary coler 417 624 0211 to confirm. Other two three windows same salvage. 5 window from passture in nowata oklahoma.

No, that's ok. I just collect data from the 33 Standards. Keep me posted
Joe

Joe, seeing as how your into 1933 chevrolet standard series CC. Can you shed any light on these questions.

I know the rear fenders on 1934-1935 DC_EC standard also fit 1933 std. CC
I would think the dash panel would also be the same.?
The runningboards are the same length but the runningboard rubber is not.
How about the rear gas tank cover panel is that also the same.
Is the trunk lid or a rumble lid the same as 1934-1935 standard.

mike

. Hey joe got another 33-607 tag on another cowel i got from same salvage. Copy it when i get home and put it on here. Like to know what it is. Thinking about using this cowel on my other three window. But hey what about my freeken door i been beggen for. I came on here for that not freaken history lesson. Just kidden love this stuff!

The door is going to be a problem. I originally posted to help you & others reading this thred in hopes that someone would have what you need. There were 2 on e-bay a month back but he wanted 2500.00 for the pair. You will have to do some digging to find these but be patient, they do come up now & again. You might join the club which would give you access to our monthly magazine & the free advertising. I can give you a couple of ideas if you send me an e-mail. It's jiaccino@cox.net. You won't be able to click & paste the address but copy it down & I'll see what I can do....Joe

Joe just sent u an email and some pics of my rags where they were sitting . The one pic of the three together is at my place in pryor okla. heres the numbers off other cowel. I dont think it goes to any of my bodies but it may when i build them. I dont build real nice street rods just as good as i can low budget. Job no 33-607. Body no K. Trim no 16 Paint no 156. Also has the number 494 close to the k but a little lower. Be on here again tomorrow all day at work. Have a good evening.

Hi jiaccino,

Good to see someone who knows what the correct models are for the 1933. Many, many, folk get it wrong.

Thanks Ray. I'm trying. I tell people if they own a 33, they better figure out what it is before they buy too many of the wrong parts...Joe

doesn't answer my pointed questions.

mike

Sorry Mike
I didn't see you pop in there. Rear fenders will fit CC,DC,EC although the fenders that came on a 33 CC when they left the factory are different.
Dash is 33 std only
Running boards are as you decribed. No replacement mats made.
Rear frame cover (gas tank apron) is 33 std only
Same with the trunk lid (33 std was the only year a std could have the rumble option other than roadster which is also different)

Joe

Hey joe great talking to u last night! Looked at rain gutter in trunk of 33 this morning again cause u got quiet when i told u it didnt go all way down to bottom. Well it does last few inches tore and bent under quarter. So it wasnt rumble seat after all.

That makes more sense on a 33607 body...Joe