VCCA Home
Posted By: timbeilby 1938 Ignition - 01/19/12 02:25 AM
I need to replace the wire between the Ignition switch and the coil. This is the wire that is in the steel cover. I removed the tumbler which was no help.

Tim
#5049
Posted By: Junkyard Dog Re: 1938 Ignition - 01/19/12 02:54 AM
To replace the electrolock wire you will have to remove the back of the lock cylinder housing with the armored cable.

laugh wink beer2
Posted By: Tiny Re: 1938 Ignition - 01/19/12 10:28 PM
Originally Posted by timbeilby
I need to replace the wire between the Ignition switch and the coil. This is the wire that is in the steel cover. I removed the tumbler which was no help.

Tim
#5049
Tim, you must be the fellow I just spoke with on the phone. The book from the Filling Station will give you the step by step how to. It's money well spent. <CLICK>
© Vintage Chevrolet Club - Discussion Forum