|
Joined: Jul 2004
Posts: 67
Shade Tree Mechanic
|
OP
Shade Tree Mechanic
Joined: Jul 2004
Posts: 67 |
Hi I seam to be having a overheating problem with my 1933 Chevy Master. It gets up to 180 degrees in about 10 minutes idling. I have the thermostat out. In last years memorial day parade, it overheated after only traveling a mile. Any suggestions would be helpful.
|
|
|
|
Joined: Jan 2006
Posts: 7,032 Likes: 107
Hall Monitor ChatMaster - 7,000
|
Hall Monitor ChatMaster - 7,000
Joined: Jan 2006
Posts: 7,032 Likes: 107 |
180 idling isn't something to be concerned about I believe. What is the indication of overheating? Is it boiling over? Does the temp gauge peg out? When you fill the radiator do you fill it to the top? The reason I ask is, if it's boiling over and that's what you consider overheating, if you're filling the radiator to the top it's probably not overheating, just expelling the excess coolant. You don't fill unpressurized systems to the top since hot coolant expands and has to have somewhere to go. If, on the other hand, the temp gauge is pegging to hot you do indeed have an issue.
VCCA Member 43216 Save a life, adopt a senior shelter pet. 1938 HB Business Coupe 1953 210 Sedan
|
|
|
|
Joined: Jan 2002
Posts: 30,699 Likes: 141
ChatMaster - 25,000
|
ChatMaster - 25,000
Joined: Jan 2002
Posts: 30,699 Likes: 141 |
First Can you see thru the core looking from the back to the front? The core may be packed with 50 years of bugs and dirt. Use a garden hose with pressure to clean.
After that I would suggest removing both hoses and flush the core and block, \
I would also suggest using a radiator flush type acid but that item is difficult to find now days.
The water baffle behind the water pump may be defective.
going up tp to180 ater 10 minutes of idle is not too unusual. In prades I always put transmission in neutral and speed up the engine as often as possible. Speeding up the engine makes better water circulation and fan pushes more air thru the radiaor core....and better for the engine as gets the oil thrown around better for lubrication.
Gene Schneider
|
|
|
|
Joined: Dec 2007
Posts: 4,021 Likes: 99
ChatMaster - 4,000
|
ChatMaster - 4,000
Joined: Dec 2007
Posts: 4,021 Likes: 99 |
I agree that 180 while idling is not a concern.
Remember that a thermostat sets the minimum operating temperature of an engine. Once it is open it allows normal coolant flow.
My limited experience with not running a thermostat was disappointing especially on cooler days. The engine would hardly get to 140. It ran a lot better with a 160 thermostat. Typically the temperature gauge would read 170 which is normal. The rear of the head is hotter than at the thermostat housing.
As always, Gene's recommendations for simple fixes are great advice.
Rusty
VCCA #44680
|
|
|
|
Joined: May 2002
Posts: 6,149 Likes: 41
ChatMaster - 6,000
|
ChatMaster - 6,000
Joined: May 2002
Posts: 6,149 Likes: 41 |
When the cooling system is clean the biggest restriction is the thermostat but isnt that much different to the radiator. I agree with Rusty about running without a thermostat. Tony
1938 1/2 ton Hope to drive it before I retire
|
|
|
3 members (Oldiron, NeilA, jp49),
57
guests, and
21
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums58
Topics59,069
Posts429,046
Members18,308
|
Most Online1,133 Jan 22nd, 2020
|
|
|
|