Reproduction Parts for 1916-1964 Chevrolet Passenger Cars & 1918-1987 Chevrolet & GMC Trucks



Visit the new site at vcca.org

Previous Thread
Next Thread
Print Thread
Rate Thread
#164872 02/09/10 10:44 PM
Joined: Feb 2010
Posts: 5
G506 Offline OP
Grease Monkey
OP Offline
Grease Monkey
Joined: Feb 2010
Posts: 5
I own a 1942 Chevrolet G506 1.5 ton military truck. The truck came with a 235cid engine and 4 speed non syncro transmission. The engine was updated to a 1955-57 235cid but still has the orginal trans. I would like to update the trans to a syncro unit, however i do not want to modify linkages etc. Is there a snycro out there that will bolt in.

G506 #165124 02/11/10 08:37 PM
Joined: Dec 2001
Posts: 500
Oil Can Mechanic
Offline
Oil Can Mechanic
Joined: Dec 2001
Posts: 500
The most practical transmission to use would be the SM420 4-speed that was used in GM trucks from 1948-66. It is not a bolt-in, it requires the bell-housing from a 1948-66 Chevrolet truck. Jim Carter in Independance, MO sells them for $185 that have been modified for the brake/clutch pedal mounting. And you could have to modify the drive shaft to mount it to the back of the trans.


wdoftexas
wdoftexas #165645 02/17/10 01:51 AM
Joined: Feb 2010
Posts: 5
G506 Offline OP
Grease Monkey
OP Offline
Grease Monkey
Joined: Feb 2010
Posts: 5
Thanks for the help.


Link Copied to Clipboard
 

Notice: Any comments posted herein do not necessarily reflect the official position of the VCCA.

Powered by UBB.threads™ PHP Forum Software 7.7.5