Reproduction Parts for 1916-1964 Chevrolet Passenger Cars & 1918-1987 Chevrolet & GMC Trucks


Previous Thread
Next Thread
Print Thread
Rate Thread
#383435 02/06/17 01:47 AM
Joined: Nov 2005
Posts: 125
olgzr Offline OP
Shade Tree Mechanic
OP Offline
Shade Tree Mechanic
Joined: Nov 2005
Posts: 125
Hello All, I am rebuilding a 1958 - 235 motor for my chevy pickup & I cannot find the seal for the rear main; felpro # 13363 & I have been told that it has been discontinued; It is the orange rubber seal that goes behind the rope seal. Can anyone tell if I really need this seal in addition to the regular rope seal? I'm concerned about leaving it out & creating an oil leak. Thanks for your help. olgzr

Wilwood Engineering1955-1957

Willwood Engineering

Wilwood Engineering designs and manufactures high-performance disc brake systems.
Wilwood Engineering, Inc. - 4700 Calle Bolero - Camarillo, CA 93012 - (805) 388-1188


olgzr #383442 02/06/17 09:53 AM
Joined: Jan 2002
Posts: 30,700
Likes: 141
ChatMaster - 25,000
Offline
ChatMaster - 25,000
Joined: Jan 2002
Posts: 30,700
Likes: 141
The rubber seal replaces the rope seal. You do not need both and there is room for only one.
If it were mine I would do everything possible to find a rubber seal.
Look for an SKF 199.....Rock Auto Parts amy have it.
Also available in two other brands.

Last edited by Chev Nut; 02/06/17 10:01 AM.

Gene Schneider
Chev Nut #383446 02/06/17 10:26 AM
Joined: Nov 2005
Posts: 125
olgzr Offline OP
Shade Tree Mechanic
OP Offline
Shade Tree Mechanic
Joined: Nov 2005
Posts: 125
Thx for your reply chev gene; In my motor there are two groves, the larger one for the rope seal ( 3/8) wide & one behind it (1/4") for the smaller orange one. If you say I don't need both of them I will assemble w/just the rope seal; However I will search for the one that you said to look for.

olgzr #383447 02/06/17 10:32 AM
Joined: Jan 2002
Posts: 30,700
Likes: 141
ChatMaster - 25,000
Offline
ChatMaster - 25,000
Joined: Jan 2002
Posts: 30,700
Likes: 141
"the one behind" is a return opening for oil that gets by the rope seal. It MUST be left open.
Amazon has the rubber seal under SKF #14939 for less than $11.
Also if you do a Bing search of SKF 199 or 14939 you will find many vendors.

To be sure check with a local SKF or National seal and bearing vendor.

Last edited by Chev Nut; 02/06/17 11:07 AM.

Gene Schneider
olgzr #383785 02/11/17 12:43 PM
Joined: Nov 2005
Posts: 125
olgzr Offline OP
Shade Tree Mechanic
OP Offline
Shade Tree Mechanic
Joined: Nov 2005
Posts: 125
Hello, I'm replacing the rings on my 235 chevy engine & my question is which is the compression ring & which is the oil ring? Does the compression ring go in top groove & oil ring in second groove? thanks, olgzr

olgzr #383786 02/11/17 12:51 PM
Joined: Jan 2002
Posts: 30,700
Likes: 141
ChatMaster - 25,000
Offline
ChatMaster - 25,000
Joined: Jan 2002
Posts: 30,700
Likes: 141
The piston has three ring groves. The top two groves are for the compression rings. The bottom is for the oil ring.
Some replacemet rings have the middle ring in two or moe pieces and it is a combination compression and oil control ring. Best is to read the instructions that come with the rings as there is a top and bottom side of the rings. Also clean th carbon out of the ring groves and drill the carbon out of the oil return holes behing the bottom oil ring grove.


Gene Schneider

Link Copied to Clipboard
Support The VCCA!

Enjoy the forum? Become a VCCA member! The World's Best Chevrolet and GMC Club!


Member Photos
1964 Chevrolet Impala SS
1964 Chevrolet Impala SS
by DreamChevy, February 17
My 1933 Chevy 2 Dr. Sedan
My 1933 Chevy 2 Dr. Sedan
by 1939Chevy1, November 24
Back on the road 79 years later
2 1927 Chevrolet Trucks
2 1927 Chevrolet Trucks
by 1927TRUCKS, June 7
Who's Online Now
1 members (Tiny), 82 guests, and 19 robots.
Key: Admin, Global Mod, Mod
Newest Members
NeilA, Jayhicks, Tomvanhouten, Dads29Chevy, Tractorman
18,308 Registered Users
Today's Birthdays
SabrinaKarras, Speedy1
Forum Statistics
Forums58
Topics59,072
Posts429,077
Members18,308
Most Online1,133
Jan 22nd, 2020
 

Notice: Any comments posted herein do not necessarily reflect the official position of the VCCA.

Powered by UBB.threads™ PHP Forum Software 7.7.5