|
|
|
1933-36
|
|
Re: Trunk handle
by
Chevcop
Today at 07:44 PM
It is incorrect and not even close to being right.
|
|
|
1949-54
|
|
|
Re: White walls
by
Chev Nut
Today at 07:40 PM
If they are real new that will stop after a few years. I havn't cleaned the W.W. on my '39 in two years. Had it out yeaterday and they are still white. Two are about 20 years old (getting replaced this year) and two are about 6 years old.
|
|
|
1929-32
|
|
|
Help! rear drum removal on my 31 coupe
by
justnuts40
Today at 07:39 PM
I can't get the drums loose from the rear axels on my 31 coupe. I tried a puller, broke it, made a super heavy duty puller, used alot of heat, broke that one too, tried a big slide puller and alot more heat, it won't budge. Every other bolt on this c
|
|
|
1937-42
|
|
|
Re: Automatic Choke
by
Chev Nut
Today at 07:36 PM
Thats the one that looks like a Chevrolet W-1 with an automatic choke. One that looked like that was used on the Pontiac engines in the mid '30's.
Now the one on your 216 work work well on my '39 if I wanted an automatic choke.
|
|
|
1937-42
|
|
|
PARTS - Wanted
|
|
|
1929-32
|
|
|
Re: Fuel Gauge Sender Unit Parts
by
Junkyard Dog
Today at 05:56 PM
To get a high quality repair of your original sending unit, go here: http://www.johnwolfco.com/default2.asp?active_page_id=200
|
|
|
Tech Talk
|
|
|
Re: Fuel Tanks
by
rbl2
Today at 05:46 PM
I've been going through the same problem many of you have. One day I was talking to a gentleman in his early 70's about my car. He told me he had worked in the oil fields most of his life and they used something called "Ospho" to prevent rust. It's a
|
|
|
1971-83
|
|
|
Re: Membership help
by
cordman
Today at 04:59 PM
Go to a friend or neighbor and have them print it on their printer.
|
|
|
General Discussions
|
|
|
Re: insurance value 1941
by
cordman
Today at 04:53 PM
Did I see this website on this Chat Site or did someone email it to me? I don't remember, but it is a neat website to find car values.
http://www.manheimgold.com/car_lo.html
I just reread this thread and see it is mentioned ab
|
|
|
1937-42
|
|
Re: 1938 FRONT ASH TRAY KNOB
by
1939masterdeluxe
Today at 03:25 PM
let me see what I have. I have a 39 if it is the same. I am unsure. I have many extra parts that came with my project. Let me do some digging buddy. Let me know if you need anything else. I have way to many extra parts to list
|
|
|
1937-42
|
|
MANY 1939 chevrolet master deluxe parts
by
1939masterdeluxe
Today at 03:19 PM
Hello again. I purchased a 1939 chevrolet master deluxe sport sedan recently and just got done getting the title squared away. With the car I also for the most part received a parts car, for lack of better words, with it....less the original frame.
|
|
|
1984-Current
|
|
|
Re: 1998- Chevrolet Blazer, opinons needed please .
by
Chev Nut
Today at 02:55 PM
They also tend to have a lot of eletrical probles, have an expensive fuel pump that usually lasts only a few years (like a $1200 job) and fuel injector problems. I am a Chevrolet fan but would not recommend this truck. I have contact with Chevrolet
|
|
|
1937-42
|
|
Re: 1939 chevrolet master deluxe VIN
by
1939masterdeluxe
Today at 02:53 PM
Well guys... I am extremely pleased at the moment. I got a clear title and VIN plates!! I called an outfit who sells titles and VIN plates for restoration purposes. Years ago titles were not marked salvage when the vehicle was totaled, junked, dis
|
|
|
Mechanical - Engine, Trans, etc
|
|
|
Re: uRochester B
by
Chev Nut
Today at 02:43 PM
The Rochester carburetor was always very prone to flooding caused by dirt, etc. When they were first used in production in 1950 that was their largest problem. We installed a gas filter on every new car before it was delivered. Took Chevrolet seven
|
|
|
Chev CARS & Trucks - For Sale
|
|
|
Radios, Tools, Accessories
|
|
|
Re: Identification of Kent Moore Tools
by
35 pickup man
Today at 12:16 PM
ToolmanI have two Kent-Moore Manuals one is the 1929 edition that covers many 4 cyl. models and the 1929 6 cyl. the second manual is the 1935 edition. Just in case you need any information from this manuals just e-mail or PM me.
|
|
|
1933-36
|
|
|
Re: Tools ?
by
35 pickup man
Today at 12:08 PM
The best way to describe the tools for your car is get a copy of the Chevrolet Tools put out by are Tool Tech Advisor David Miner. He has a list and pictures of all the 1936 Master Tools and Jack. Most tools were made by VLCHEK Tool Company of Clev
|
|
|
Free Stuff
|
|
|
Mechanical - Engine, Trans, etc
|
|
|
1912-1928
|
|
|
General Discussions
|
|
|
PARTS - For Sale
|
|
|
PARTS - Wanted
|
|
